Glossary of Terms

COMMONLY USED PROJECTION SCREEN TERMS

BRIGHTNESS

Brightness” is a psycho-physiological phenomenon that cannot be measured directly. The term “photometric brightness” was at one time used to refer to luminance. However, it is no longer used for scientific or engineering purposes. 

FOOT-CANDLE

A foot-candle is equivalent to one lumen per square foot (where a lumen is a measure of the luminous flux, or quantity of light).

A wax candle flame has a luminous intensity (or equivalently, candlepower) of approximately one candela. If you hold the candle one foot away from a surface, the illuminance of the surface at this distance due to the light from the candle will be approximately one foot-candle. It will be 1/4 fc at two feet, 1/9 fc at three feet, and so on in accordance with the inverse square law for point light sources.

ILLUMINANCE

In plain English, illuminance is the quantity of light arriving at a point on a real or imaginary surface. (The point does not have to be located on a physical surface.) 

LUMEN

 A Lumen is a quantity of light, the same kind of unit as a watt, but measured in such a way that takes into account the sensitivity of the eye. If you are looking at the specification of a light source Lumens are the measured as the entire output, no matter which direction the light is going in.  

LUX

A Lux is a lumen per square meter, which we might call illumination in Layman’s terms but, when speaking technically, it is referred to as illuminance. 

NIT

 A Nit is a lumen per square meter per steradian, which we might call brightness to our family members, but luminance to our peers. If a Lux of illuminance

CANDELA

A candela is a lumen per steradian. It is used for “point” sources so that you can calculate how much light is cast on a surface no matter where the surface is. 
horizontal break