CINEPRO ARGENT 3DE is a silver front projection passive 3D screen surface. It has available gains from 0.8 to 2.5 The screen coating is applied only semi-rigid and rigid substrate material. This screen is ideal for situations where passive 3d application is desired in a single screen, single curved screen, or 4 screen-wall immersive environment. Because the screen is a stereoscopic passive 3D matrix, the option of standard projection on a silver screen may also be achieved.
Even though the CINEPRO ARGENT 3DE has a higher contrast color, it still holds its own in the lower gains with a half gain of greater than 65 degrees. In higher gains of 2.0 or greater the viewing cone will degrade to 20 degrees. In that the ARGENT 3DE requires a large quantity of lumens to function, when brighter images are required due to higher ambient light conditions, higher gains are suggested.
The optical layer is infused into the substrate and will not peel or delaminate. The formulation is specifically designed to meet industry needs when color wash-out is undesirable but 3D imagery is needed. CINEPRO ARGENT 3DE has excellent contrast and field consistency of brightness and color distribution.
Due to the wide angle half gain the CINEPRO ARGENT 3DE is ideal for low light, high off angle viewing.
The coating is applied directly to the substrate and is not an applied film
Eliminates the possibility of shrinkage, delamination, or glue discoloration.
The substrate is rigid or rollable
Enables access to areas that non flexible screens cannot be installed but once installed offer better resistance to deflec- tion due to changes in pressure.
ACRYVIEW – up to 104″ x 216″
CINEFIRE – Up to 130″ X 204″
CINEPRO ULTRA CINEFLEX II – Up to 100″ X 400″