CINEPRO Ultra Koul is a Neutral Gray single element rear projection screen that is versatile and yet efficient. The light gray coloration is done to add contrast to the images that are being projected upon it. It is commonly produced in a .8 to 1.3 gain. At a 1.0 gain the Half gain is 40 degrees. When using a 1:1 lens or even with some of the very wide angle projection lenses, there will be no hot spot. The diffusing emulsion layer is infused into the surface of the substrate and will not peel or delaminate. The surface is resin re-enforced to prevent handling damage. The opposing side of the screen can be coated with TEC SATIN non-glare hard coat to help eliminate retro reflection and double imaging.
Excellent ambient light rejection
Enables the screen to be used in systems where higher
ambient lighting is necessary during the viewing experience such as presentations or public access areas.
No failure due to thermal expansion and contraction
Because the screen is produced using a surface cross link-
ing method, the coating expands and contracts at the same rate as the substrate therefore eliminating shrinking or craz- ing of the actual screen surface.
Increased contrast levels
Excellent option for multi use applications where corporate
data or video will be displayed on the same screen.
Multiple gain selection
ACP produces custom gain levels based on the type of in-
stall and lens selection. This way, the end user is provided with the optimal solution for their application.
ACRYVIEW- up to 104″ x 216″
CINEFIRE- Up to 130″ X 204″
CINEPRO ULTRA CINEFLEX II- Up to 100″ X 400″