CINEPRO ULTRA KOUL BLEND is a lightly contrasted rear projection screen. It is normally produced with a .65 -.7 on axis gain and high transmission so the light is utilized most efficiently across the screen. The half gain viewing angle is 70+ degrees. Even with very wide angle projection lenses, there will be little or no hot spotting. The optical layer is infused into the substrate and will not peel or delaminate. The surface is resin re-enforced to prevent handling damage during installation. TEC SATIN layers are available but not advisable due to the blending of the images. When using a 1:1 lens or even with some of the very wide angle projection lenses, there will be no hot spot.
Exceptional Wide Angle Viewing Cone. Superior resolution and contrast for this type of screen.
Due to the wide angle half gain the CINEPRO ULTRA KOUL FLIGHT is ideal for simulators and blending.
Multiple gain selection
Several lens possibilities are used in simulator production. ACP produces custom gain levels based on the type of install and lens selection. This way, the end user is provided with the optimal solution for their application.
The coating is applied directly to the substrate and is not an applied film.
Eliminates the possibility of shrinkage, delamination, or glue discoloration.
ACRYVIEW – up to 104” x 216”
CINEFIRE – Up to 130” X 204”
CINEPRO ULTRA CINEFLEX II – Up to 100” X 400”